Custom Power Solutions

Shocking Batteries

		The vast majority of batteries are used in low voltage applications where there is little danger of electric shock, but familiarity can breed a careless attitude towards the potential dangers. With high voltage batteries the danger of electric shock is very real.

As the use of batteries with voltages in excess of 300 Volts becomes more commonplace with the growing popularity of electric and hybrid electric vehicles, there is a danger that the general public, so used to relatively benign 12 Volt batteries, may underestimate the hazards associated with higher voltage traction batteries. Electric shocks account for about 1% of all fatal accidents, mostly to people who ought to know better.

This page describes the dangers and outlines some safety precautions when working with high voltage batteries.

Electric Shock

A physiologist may view the body as containing an electrical network, passing tiny nerve signals around enabling us to do all those essential things we like to do so much such as breathing, thinking and moving. Its function can be severely disrupted by the presence of an extraneous current. The body also contains a network of canals transporting oxygen to the muscles and the brain in a salty solvent called blood which incidentally provides a good conducting medium for electricity.

To the battery however, the body is an insulated skin bag containing electrolyte. See also nerve impulses.

Despite its common use as an indicator of danger, and the implication in the opening paragraph, voltage is not a reliable indicator of the severity of an electric shock. The most important indicators are the actual current which flows through the body and its duration, and even these can lead to misleading conclusions because the physiological consequences depend on the route the current takes through the body. Current passing through the heart or the brain is infinitely more damaging than current passing across a finger or the palm of the hand caught between the terminals of a battery. A sustained current will also do more damage than a short current pulse.

Physiological Consequences of Electric Shock

The table below outlines some of the effects of direct electrical currents passing through the body for a period of one second.

Important Notes: The two tables on this page are compiled from a variety of sources and although there is general agreement between the sources on the magnitude of the causes and effects, the actual values are subject to very wide variations. Obviously, it is not practical to perform tests on human subjects to verify the levels at which shocks become fatal and some data is derived test on animals. The values used are therefore average or typical values which should be used for illustrative purposes only.

Dangerous currents are shown in Red.

	Shocking Effects
Current (contact 1 second) Physiological Effect Less than 1mA No sensation 1mA Threshold of feeling. Tingling sensation 5mA Maximum harmless current 8 -15 mA Mild shock Start of muscular contraction. No loss of muscular control 15 -20 mA Painful shock Sustained muscular contraction. Can't let go of conductor 20-50 mA Can't breathe. Paralysis of the chest muscles Possibly Fatal 50 - 100 mA Intense pain Impaired breathing Ventricular fibrillation Possibly fatal - Fatal if continued 100-200 mA Ventricular fibrillation Probably fatal - Fatal if continued Respiratory function continues Over 200 mA Sustained ventricular contractions followed by normal heart rythm (defibrillation) Chest muscles clamp the heart and stop it for the duration of the shock. This also prevents ventricular fibrillation improving the chances of survival, but other factors come into play. Burns Temporary respiratory paralysis. Possibly fatal - Fatal if continued Over 1 Amp Severe burns. Internal organs burned. Death Survivable if vital organs not in current path - e.g. across a finger or hand

Notes:

• Low voltages do not mean low hazard.

• Other things being equal the degree of injury is proportional to the length of time the body is in the circuit.

• According to the IEEE Std. 80, the maximum safe duration of a shock can be determined by the formula

  T = 0.116/(E/R), where T is the time in seconds, E is the voltage and R, the resistance of the person (assumed to be 1000 ohms).

  For a 120V circuit the maximum shock duration = 0.116/(120V/1000) = 1 Second
  For a 240V circuit the maximum shock duration = 0.116/(240V/1000) = 0.5 Second

• It is extremely important to free a shock victim from contact with the current as quickly as possible. The difference of a few seconds in starting artificial respiration may spell life or death to the victim. Don't give up unless the victim has been pronounced dead by a doctor.
• Women tend to be more susceptible to electric currents than men
• Lower body weight increases the susceptibility to electric currents
• A shock from DC is more likely to freeze or stop the victim's heart.
• The current range of 100 to 200 ma, is particularly dangerous because it is almost certain to result in lethal ventricular fibrillation, the shocking  of  the  heart  into  a useless flutter rather than a regular beat .

• The fibrillation threshold is a function of current over time. For example, fibrillation will occur with 500mA over 0.2 seconds or 75mA over 0.5 seconds.

• AC is more dangerous than DC causing more severe muscular contactions. AC is also more likely to cause a victim's heart to fibrillate , which is a more dangerous condition. Safe working thresholds are consequently much lower for AC voltages.
• It is easier to restart a stopped heart once the source of the electric shock has been removed than it is to restore a normal beating rythm to a fibrillrating heart. A heart that is in fibrillation cannot be restored to normal by closed chest cardiac massage. Defibrillrators give the heart a jolt of DC to stop fibrillation to allow the heart to restart with a normal beat.
• Victims of a high voltage shock usually respond better to artificial respiration than do victims of a low voltage shock, probably because the higher voltage and current clamps the heart and hence prevents fibrillation. The chances of survival are good if the victim is given immediate attention.
• Shock victims may suffer heart trouble up to several hours after being shocked. The danger of electric shock does not end after the immediate medical attention.
• Don't expect a circuit breaker to protect you. They trip at 15 Amps.

Shocking Potential

While the severity of the electric shock is mainly determined by the current, the current in turn is influenced by numerous variables which make up the resistance of the current path making it difficult to predict the current which will flow from a given voltage. The two major components of the resistance are, the resistance of the body between the points of contact with the electrical circuit, and the contact resistance between the body and the voltage source. In more detail the body resistance depends on the length of the conducting path through the body and the body weight. The contact resistance depends on whether the contact is wet or dry, the area of the contact, the firmness of the grip or touch of the electrical contact and whether there is any other insulation in the path. Because of this wide variation in resistance and contact duration, people have been known to survive shocks of 40 KV while others have been killed by less than 50 Volts

The following table shows the conditions which could lead to a serious electric shock. It gives the body and contact resistances associated with a variety of conditions and indicates the current which will flow for different voltages. The table above outlines the consequences.

	Currents Resulting From Electric Shocks
Circumstance   Resistance (Ohms) Current mA   50V   100V 250V 500V Hand to ground (Rubber gloves or soles) 20,000,000 0.002 0.005 0.01 0.02 Hand to ground (Dry hand, Leather soles) 1,000,000 0.05 0.1 0.2 0.5 Dry skin 500,000 0.1 0.2 0.5 1 Light touch (Dry) 500,000 0.1 0.2 0.5 1 Hand gripping wire or metal tool (Dry) 20,000 2.5 5 12.5 25 Light touch (Wet) 10,000 5 10 25 50 Hand to ground (Wet hand, Damp leather sole) 10,000 5 10 25 50 Hand gripping wire or metal tool (Wet) 5,000 10 20 50 100 Hand to Hand (Damp) 1500 33.3 66.6 166 333 Wet skin 1000 50 100 250 500 Across human body 1000 50 100 250 500 Hand to foot, Hand to hand (Excluding skin) 500 100 200 500 1000 Between the ears , Across a finger (Excuding skin) 100 500 1000 2500 5000 Punctured skin with cuts, abrasions or burns caused by the electric current itself No resistance

Notes:

• The skin is a most important insulator.
• There are huge variations in contact resistance.
• Working with minor wounds to the hands seriously increases the risk of shock.
• Once a shock has been initiated, the resulting electrical burn can puncture the skin and increase the shocking current.
• Rings, bracelets and other jewellery decrease the contact resistance to the body and increase the potential for electric shock.
• Use only one hand (keeping one hand in your pocket) while working on high voltage circuits avoids the risk of the body becoming part of the circuit.
• Risks can be minimised by using insulated hand tools (pliers, screwdrivers, spanners etc.) and by wearing rubber gloves and shoes.

Safe Working Practices

There are many published standards for safe working practices on AC power circuits including those from the HSE in the UK and OSHA in the USA. See the section on Standards.

The following are additional recommendations relevant to working on battery circuits.

• The usual safe working voltage threshold for working on batteries is 50 volts DC.
• Avoid working on a fully charged battery. Arrange for batteries to be discharged wherever possible.
• Use a voltmeter to check whether the battery is charged before starting work.
• Check that any capacitors associated with the battery circuit are discharged.
• Cover exposed terminals where possible to avoid touching or dropping tools onto them.
• When starting work on a supposedly dead circuit make contact first with the back of one hand, so that if a shock should occur, the muscle reaction will not cause the hand to grip the conductor.
• See also the notes above.

Treat high power batteries with the same respect you would give to AC mains voltages.

See also Short Circuits and their Consequences

History